Key West Treasure

You know, we have to look for fabric stores while on vacation.  It’s just in our blood!  So on a recent trip to Key West, we did a Google search and found a cute little store a few blocks off of Duvall Street called “The Seam Shoppe.”  So, one afternoon we drug Karen’s mostly good-natured husband along with us to hike down Duvall and turn left, hunting for our treasure.  Actually, he was in a great mood since we had just left the Key West Hammock Shop where he placed an order for a double hammock swing for their back yard.

Before too long, we spotted the little store across the street.  It was a bright and cheery place, although Karen and I both agree that the saleslady could have been a bit friendlier.  Maybe she had just seen too many tourists that day, and we weren’t quite as special as we thought we were!

If you quilters ever make it down to Key West, you should visit this store.  Especially if you want to make a quilt or other crafty item as a memento of your trip.  They have a lot of tropical quilt-weight cottons!  And maybe you will get a different salesperson.

Since we aren’t quilters, and we don’t have grandchildren, we hunt for garment fabric.  And right at the front door was this double-sided stand of some of the prettiest rayon we had ever seen!  Bright tropical colors, great for summer projects!  We walked around the stand handling and admiring the fabric with visions of tops, dresses, and skirts frolicking about in our heads.

While we drooled over this display, my brother-in-law ducked out in search of something a little more manly.  We took our selections to the cutting table, which meant our saleslady had to move the project she was working on to help us.  She made a small effort not to be annoyed.  Emphasis on small.  But we got six cuts of fabric between us, and a couple of patterns, and giggled our way out the door.

When we found our escort, he had just tested his masculinity by drinking “the world’s strongest coffee ever,” by his report.  On the way back to Duvall, we had to practically run to keep up with him and his caffeine buzz!

We have been home about three weeks now, and I don’t think either one of us have even pre-washed anything yet; but we will.  Since returning, we have been quite busy getting ready for our sewing classes, which started this week.  We will tell you all about the great time we had in our first classes next time!

And if we ever get to open the cute little fabric store that we talk about all the time, we promise to be friendly when you come to see us!  In the meantime, if you want to see some of what this place offers, they have an online store at tropicalfabricsonline.

We would love to hear about places you have been and found a fabric treasure! That would be good information to have before we plan another trip…

Do-It-Yourself “Butterfly” Shirt

Make yourself this flattering top! Easy do-it-yourself project!

How about a free pattern for a butterfly shirt?  Some call the look “batwing,” but I prefer butterflies to bats–I’m just that kind of girl.

I came up with this very simple pattern a few weeks back, and I have now used it to make myself four varieties of this flattering, easy-to-wear shirt.  I also made my Mom one, and she says it has become her “go-to” shirt.

So, I thought I would share it with you in case you want to try it.  It’s quick and easy, and I bet if you make one you’ll want to make another.  This pattern is easily adapted to the fit you prefer, since the main fit comes from the tapered side seam, which is the last step.

You will need basic sewing skills to attempt this top.  Although it is a simple pattern, it is not something I would recommend as an introduction to sewing.  (If you live in our area, take our beginning sewing classes for a great skill foundation to build on!)

Take the dimensions shown on the pattern below and use pattern paper to draw a full-size pattern.  Hancock’s or Joann’s should have tissue paper or a substitute. You could really use any paper available that you can pin through.  Don’t attempt to just enlarge the pattern image, because it is not drawn to scale.  Use a ruler to mark the dimensions on your pattern paper as shown.  Seam allowances are included in these dimensions. Draw and cut two pattern pieces–one using the solid neck cutting line for the shirt back, and one using the dotted neck line for the shirt front.

The curved line that  tapers out from under the arms to the bottom of the pattern is a seam that attaches the front to the back with wrong sides together; it forms the side seams and creates the armhole.

Mark your pattern according to the dimensions. This is not drawn to scale.  The lines with arrows show the dimensions of the pattern and are not stitch lines.  They do not need to be transferred onto your pattern.  There is ONE stitch line which needs to be on your pattern, and which forms the side seams and arm hole.  It is shown on the pattern as a 10 1/2″ curved line and 4″ straight line.  Use this plan to draw out two pattern pieces–the shirt front and the shirt back.  The only difference in them is that the front is cut lower (see the broken neckline).  To insure success, be sure to read and follow the step-by-step instructions

You will need 1 5/8 yards of fabric; any width is fine.  (If you want the shirt longer than the dimensions shown, you may need more fabric.  Buy twice the length you want plus three or four inches.) This pattern works best with soft fabrics that have a nice drape, such as rayon or a crinkle cotton or a soft silk.  I have used a thin linen as well.  A somewhat stiffer fabric will work, but the look will be different.  Do not attempt this pattern with heavy fabrics such as denim or chintz.

Pre-wash your fabric.  I serge the cut edges of my fabric, then wash and dry the fabric in the same manner that I plan to wash and dry my finished garment. The only adjustment I make is that I use a scant amount of detergent, since the fabric is not soiled.

It’s always a good idea to make a “muslin” of a new pattern.  Use some inexpensive fabric that has similar weight and drape as you would like for your finished project for your first attempt, and make changes as needed before using a more expensive fabric.  But this is such an easy-fit pattern that you will probably be able to wear your practice shirt proudly.

The finished measurements of this top are: neck opening – 26″; center back length -24″; bust – 43″; waist 43″; hips at bottom of top – 55″.  The bust, waist, and hips are adjustable by moving the side seam in or out.  The neck opening can be enlarged by lowering the front and/or the back.  (A little adjustment goes a long way here!)  The length can be changed by adding or subtracting at the bottom of the pattern, but be sure to redraw the tapered side seam so that the hip measurement is still what you want it to be.  Extend the side of the pattern out if you enlarge the bust, waist, and hips very much, or if you want longer sleeves and wings.

If you know that you will only have to increase/decrease the bust, waist, and/or hip measurements two inches or less, you can do that after you have finished all of the steps of the top except the side seam, which is the last step. (See step #7 in the instructions below.)


Here are your step-by-step instructions:

1.  After you have used the above dimensions to draw out your two pattern pieces, lay out fabric and place the pattern pieces on the fold at arrows.  Pin, or use weights.  Cut out the two pieces.

This photo shows the layout of the front and back pattern pieces, but it is only a partial view.  Follow the dimensions shown in the previous graphic to create your front and back pattern pieces.  If you want to try using weights instead of pins, buy some inexpensive washers from your local home improvement store. The ones shown here are 2″ in diameter.

2.  Mark the curved seam line on the shirt front.  (You can also mark the shirt back, but it is not necessary.)  I do this by placing a pin through the pattern and fabric at the beginning and end of the line, and three or four places in between.  Then I remove the pattern and use chalk or a disappearing ink fabric marking pen to lightly mark the line with a dot in a few places along the pinned line directly onto the right side of the top. (Hint: Use small head pins and push the head all the way in to the pattern and fabric.  Then lift the paper pattern off carefully.  The pins will stay in place.)

3. With right sides together, serge the front and back together at the shoulder seams, using a 1/2″ seam.  Press seam toward the back.  (If you don’t have a serger, use a straight stitch, trim the seam to 3/8 ” or so, then finish the edges with a wide zig zag stitch to form an overcast seam, allowing the needle to go past the cut edge of your fabric on the right side of the zig zag.  Or, use a French seam for a neat finish.  A French seam works best with thinner fabrics such as Rayon or silk.  Sew the shoulder seam with WRONG sides together, using a 1/4″ seam.  Trim the seam carefully, so that it is a little less than 1/4″.  Press the seam allowance to one side.  Turn right sides together at the shoulder seams; press and pin.  Stitch, using a 1/4″ seam.  Press.  Now the raw edge is enclosed.)

5.  Roll the neck edge into a scant 1/4″ hem by folding the edge twice; pin.  This can be tricky, so take your time.  I use a lot of pins in this step.  You will need to gently pull to manipulate the curved edges into this rolled hem.  Stitch carefully, using a skinny zigzag stitch, which makes it easier to catch the turned fabric. A zigzag stitch will look better than a crooked seam that was supposed to be straight.  Practice the stitch on a piece of scrap fabric to get the width and length you like.  I use a stitch width of 2.5, and a stitch length of 3.5.  Press the seam.  (If you used a stiffer fabric, this step may be very frustrating.  Alternatively, you can use bias tape to finish the edge.  Pin and stitch single fold bias tape to neck edge with right sides together, then fold the tape to the wrong side; press, pin, and topstitch.)

Take your time pinning the neck edge into a scant 1/4″ rolled hem, manipulating the curves and using lots of pins.

Rolled neckline was secured with a narrow zigzag stitch, then pressed.

6.  Finish the sides and bottom of the shirt by turning the raw edge to the wrong side 3/8″; press.  Turn again 3/8″, press again and pin.  Sew the sides first, finishing to the edge with a backstitch.  Then sew the hem of the front and back in the same manner.  I prefer to topstitch with the garment’s right side to the machine, but you can do it either way.  Just take your time so that your topstitched sides and hem are neat and straight.  You can either miter the corners, or just turn and square the edges.  It should not be very bulky on the corners if you are not using a thick fabric. (When I made the shirt pictured at the top, I actually made the bottom hem about 3/4″ deep but I kept the side seams at 3/8″.  It’s up to you and the look you want to achieve.)

Here is a close-up of the corners. I folded the corners rather than mitering, since the fabric I used is a lightweight rayon. These folded corners actually give some weight on the bottom and help the top hang well.

7.  Now that all of your edges are finished, the only thing left to do is the side seam.  This is the seam on the pattern that is a curved line that tapers out from under the arms to the bottom of the shirt.  Lay the top down on a flat surface right sides together, aligning the front to the back at the sides and bottom; pin the front to the back along the seam line that you marked earlier on the front.  Place the pins close together in a line along the seam line.  Then carefully try on the shirt.  Adjust the pins according the the fit you like.  (If you don’t want to pull the top on and off with a bunch of pins in it, you could machine baste the line using the longest stitch your machine will allow.)  When you have made any required adjustments, take the shirt off and make any necessary changes to the marked seam line.  Pin for sewing.  Stitch along the seam line.  Be sure you neatly backstitch at the beginning and the end of this seam to keep it intact. (If you prefer, the side seam can be sewn much lower, creating a larger armhole opening.  However, will need to wear a tank top under your shirt if you do this because the side opening will expose the side of your bra.)

Pin along the marked seam line, placing pins close together.  Then try on to make sure the seam line is where you want it.  Make any adjustments necessary.

Once you have tried on the top with the pinned side seams, and have made any necessary adjustments, then place pens perpendicular to the seam mark for sewing.  Stitch, following your marked line.  Be sure to backstitch well and neatly at the top an bottom of the stitch, as this topstitch is your side seam.

Congratulations!  Now wear it proudly, and enjoy the compliments!  And be sure to send us a picture.

Now that you are familiar with the pattern, you can come up with all kinds of alternatives for variety.  One variation I did was to cut the bottom with a rounded hem (see the blue print shirt below).  When I made this pattern for the first time (pictured at the beginning of this article), I used a fabric that was really pretty on both sides.  So I turned the bottom up to hem on the outside, which made the bottom match the inside of the wings on the side of the top.  I also did one with a “collar” and split sleeves. You could insert elastic in the front and back between the side seams to form and empire waist, which is a very flattering look.  You could use a drawstring to gather the top at the shoulders.  You could use a sheer fabric and wear a tank top under it.  For more ideas, look around your local mall.  Variations of this top are everywhere!

This variation has a rounded hem.

My pretty mama in the top I made her!

This variation has a “collar” formed by cutting the shoulder seam higher and then cutting down the center front and finishing in a narrow tapered hem, reinforced at the bottom of the split.  I covered the reinforcing stitches with buttons.

Classes are filling fast!

We are so excited about our classes which start June 19!  We are busy, busy, busy getting our sewing space set up and ready.  Sewing machines have been set up and tested, the cutting and ironing spaces have been laid out, and we even made our own table top ironing boards to be used on top of the cutting tables!

Our classes start June 19.  The evening class is full, but we still have space in the morning class.  If you live in middle Georgia, email us for more info.  Make plans to join us!